Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM00000171P00AX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE: REAR BRAKE: REASSEMBLY; 2016 MY Tacoma [08/2015 - ]
REASSEMBLY
1. INSTALL REAR WHEEL CYLINDER CUP KIT
(a) Provisionally tighten the bleeder plug to the rear wheel brake
cylinder, and install the bleeder plug cap.
(b) Apply lithium soap base glycol grease to 2 new cylinder cups
and the 2 pistons.
(c) Install the cylinder cup onto each piston.
(d) Install the compression spring and 2 pistons onto the rear wheel
brake cylinder.
(e) Install the 2 new wheel cylinder boots onto the rear wheel brake
cylinder.
2. INSTALL FRONT OR UPPER REAR WHEEL BRAKE
CYLINDER ASSEMBLY
(a) Install the rear wheel brake cylinder assembly with the 2 bolts.
Torque:
9.5 N·m {97 kgf·cm, 84in·lbf}
(b) Using a union nut wrench, connect the brake tube.
Torque:
without union nut wrench -
15 N·m {155 kgf·cm, 11ft·lbf}
with union nut wrench -
14 N·m {145 kgf·cm, 10ft·lbf}
HINT:
T
his torque value can be obtained by using a torque wrench with
a fulcrum length of 300 mm (11.8 in.) and a union nut wrench
with a fulcrum length of 22 mm (0.866 in.)
.
This torque value is effective when the union nut wrench is
parallel to the torque wrench.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *