Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM00000171T037X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE: HYDRAULIC BRAKE BOOSTER: REMOVAL; 2016 MY Tacoma [08/2015 - ]
REMOVAL
NOTICE:
Before starting the work, make sure that the ignition switch is off and depress the brake pedal more than
20 times.
As high pressure is applied to the No. 1 brake actuator tube, never deform it.
Do not turn the ignition switch to ON until the work is completed.
HINT:
When pressure in the accumulator is released, reaction force becomes lighter and stroke becomes longer.
1. DRAIN BRAKE FLUID
NOTICE:
Immediately wash off any brake fluid off immediately that comes into contact with a painted surface.
2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
3. SEPARATE DRIVER SIDE JUNCTION BLOCK
4. SEPARATE MASTER CYLINDER PUSH ROD CLEVIS
5. REMOVE HYDRAULIC BRAKE BOOSTER
(a) Disconnect the 3 connectors from the hydraulic brake booster.
(b) Using a union nut wrench, disconnect the 4 brake lines from the
hydraulic brake booster.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *