Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

(d) Install a new clip.
(e) Install the wire harness with the 2 screws.
Torque:
2.9 N·m {30 kgf·cm, 26in·lbf}
(f) Install the 2 new plugs.
9. INSTALL BRAKE ACTUATOR TUBE NO. 1
(a) Using a union nut wrench, install the brake actuator tube No. 1.
Torque:
without union nut wrench -
15 N·m {155 kgf·cm, 11ft·lbf}
with union nut wrench -
14 N·m {145 kgf·cm, 10ft·lbf}
HINT:
This torque value can be obtained by using a torque wrench with
a fulcrum length of 300 mm (11.8 in.) and a union nut wrench
with a fulcrum length of 22 mm (0.866 in.) .
This torque value is effective when the union nut wrench is
parallel to the torque wrench.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *