Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

NOTICE:
When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoid is off, depress the brake pedal again and check that the left front wheel does not
rotate by hand.
If the left front wheel rotates, replace the hydraulic brake booster.
(l) Inspect front ABS solenoid (SFRR) operation (step H).
HINT:
ON: Depress the brake pedal, activate SFRR and SFRH, and then check that the right front wheel rotates.
OFF: Deactivate SFRR and SFRH, depress the brake pedal, and then check that the right front wheel does
not rotate.
(1) Select "ABS Solenoid (SFRR & SFRH)" on the Techstream.
(2) Depress the brake pedal with stable force, then turn the "ABS Solenoid (SFRR & SFRH)" on
simultaneously by the Techstream.
(3) When the solenoids are on, check the right front wheel by rotating it by hand.
If the right front wheel stops, replace the hydraulic brake booster.
HINT:
To protect the solenoids, Techstream turns off automatically 2 seconds after every solenoid has been
turned on.
When rotating the wheel fast, the fail-safe function is activated and judgement cannot be made properly.
So rotate the wheel as slowly as possible.
NOTICE:
When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoids are off, depress the brake pedal again and check that the right front wheel does
not rotate by hand.
If the right front wheel rotates, replace the hydraulic brake booster.
(m) Inspect front ABS solenoid (SFLR) operation (step I).
HINT:
O
N: Depress the brake pedal, activate SFLR and SFLH, and then check that the left front wheel rotates.
OFF: Deactivate SFLR and SFLH, depress the brake pedal, and then check that the left front wheel does not
rotate.
(1) Select "ABS Solenoid (SFLR & SFLH)" on the Techstream.
(2) Depress the brake pedal with stable force, then turn the "ABS Solenoid (SFLR & SFLH)" on
simultaneously by the Techstream.
(3) When the solenoids are on, check the left front wheel by rotating it by hand.
If the left front wheel stops, replace the hydraulic brake booster.
HINT:
To protect the solenoids, Techstream turns off automatically 2 seconds after every solenoid has been
turned on.
When rotating the wheel fast, the fail-safe function is activated and judgement cannot be made properly.
So rotate the wheel as slowly as possible.
NOTICE:
When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoids are off, depress the brake pedal again and check that the left front wheel does not
rotate by hand.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *