Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

HINT:
To protect the solenoids, Techstream turns off automatically 2 seconds after every solenoid has been
turned on.
When rotating the wheels fast, the fail-safe function is activated and judgement cannot be made properly.
So rotate the wheels as slowly as possible.
NOTICE:
When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoids are off, turn the "TRAC Solenoid (SRCF)" on again, then depress the brake pedal
and check the front wheels by rotating them by hand.
If front wheels stop, replace the hydraulic brake booster.
(5) When the "TRAC Solenoid (SRCF)" is off, depress the brake pedal again and check that the brake pedal
can be depressed.
If the pedal can be depressed, replace the hydraulic brake booster.
(j) Inspect front ABS solenoid (SFRH) operation (step F).
HINT:
O
N: Activate SFRH, depress the brake pedal, and then check that the right front wheel rotates.
OFF: Deactivate SFRH, depress the brake pedal, and then check that the front right wheel does not rotate.
(1) Select "ABS Solenoid (SFRH)" on the Techstream.
(2) Turn the "ABS Solenoid (SFRH)" on by the Techstream, then depress the brake pedal with stable force.
(3) When the solenoid is on, check the right front wheel by rotating it by hand.
If the right front wheel stops, replace the hydraulic brake booster.
HINT:
To protect the solenoid, Techstream turns off automatically 2 seconds after every solenoid has been turned
on.
When rotating the wheel fast, the fail-safe function is activated and judgement cannot be made properly.
So rotate the wheel as slowly as possible.
NOTICE:
When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoid is off, depress the brake pedal again and check that the right front wheel does not
rotate by hand.
If the right front wheel rotates, replace the hydraulic brake booster.
(k) Inspect front ABS solenoid (SFLH) operation (step G).
HINT:
ON: Activate SFLH, depress the brake pedal, and then check that the left front wheel rotates.
OFF: Deactivate SFLH, depress the brake pedal, and then check that the front left wheel does not rotate.
(1) Select "ABS Solenoid (SFLH)" on the Techstream.
(2) Turn the "ABS Solenoid (SFLH)" on by the Techstream, then depress the brake pedal with stable force.
(3) When the solenoid is on, check the left front wheel by rotating it by hand.
If the left front wheel stops, replace the hydraulic brake booster.
HINT:
T
o protect the solenoid, Techstream turns off automatically 2 seconds after every solenoid has been turned
on.
When rotating the wheel fast, the fail-safe function is activated and judgement cannot be made properly.
So rotate the wheel as slowly as possible.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *