Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM00000171Q037X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE: HYDRAULIC BRAKE BOOSTER: INSTALLATION; 2016 MY Tacoma [08/2015 - ]
INSTALLATION
1. INSTALL HYDRAULIC BRAKE BOOSTER
(a) Install a new brake booster gasket onto the hydraulic brake booster.
(b) Install the hydraulic brake booster with the 4 nuts.
Torque:
14 N·m {145 kgf·cm, 10ft·lbf}
(c) Using a union nut wrench, connect the 4 brake lines to the
correct positions of the hydraulic brake booster, as shown in the
illustration.
Text in Illustration
*a to Right Rear Wheel
*b to Right Front Wheel
*c to Left Front Wheel
*d to Left Rear Wheel
Torque:
without union nut wrench -
15 N·m {155 kgf·cm, 11ft·lbf}
with union nut wrench -
14 N·m {145 kgf·cm, 10ft·lbf}
HINT:
T
his torque value can be obtained by using a torque wrench with
a fulcrum length of 300 mm (11.8 in.) and a union nut wrench
with a fulcrum length of 22 mm (0.866 in.)
.
This torque value is effective when the union nut wrench is
parallel to the torque wrench.
(d) Connect the 3 connectors.
2. INSTALL MASTER CYLINDER PUSH ROD CLEVIS
3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
4. INSPECT BRAKE PEDAL HEIGHT
5. INSPECT PEDAL FREE PLAY
6. INSPECT PEDAL RESERVE DISTANCE
7. FILL RESERVOIR WITH BRAKE FLUID
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *