Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM00000171E00JX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE: FRONT BRAKE: INSTALLATION; 2016 MY Tacoma [08/2015 - ]
INSTALLATION
1. INSTALL FRONT DISC
(a) Align the matchmarks of the front disc and the front axle hub
and install the front disc.
Text in Illustration
*a Matchmark
HINT:
W
hen replacing the disc with a new one, select the installation
position where the disc has the minimum runout.
2. INSPECT DISC RUNOUT
(a) Temporarily install the front disc with the hub nuts.
Torque:
113 N·m {1152 kgf·cm, 83ft·lbf}
(b) Using a dial indicator, measure the disc runout 10 mm (0.394
in.) away from the outer edge of the front disc.
Maximum disc runout:
0.05 mm (0.00197 in.)
If the disc runout is the maximum value or greater, check the
bearing play in the axial direction and check the axle hub runout
. If the bearing play and axle hub runout are normal,
adjust the disc runout or grind it on an on-car brake lathe.
3. INSTALL DISC BRAKE CYLINDER ASSEMBLY
(a) Install the disc brake cylinder assembly with the 2 bolts.
Torque:
123 N·m {1254 kgf·cm, 91ft·lbf}
(b) Using a union nut wrench 10 mm, install the brake tube to the disc brake cylinder assembly.
Torque:
15 N·m {155 kgf·cm, 11ft·lbf}
NOTICE:
U
se the formula to calculate special torque values for situations where a union nut wrench is combined with
a torque wrench
.
4. INSTALL FRONT ANTI SQUEAL SHIM KIT
(a) Install the 2 front anti squeal shims onto each of the front disc brake pads.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *