Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

A
Text in Illustration
*a
Component without harness connected
(Roof Console Box Assembly)
- -
(b) Measure the resistance according the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
R44-16 (+) - T17-9 (+) Always Below 1 Ω
R44-12 (GND) - T17-6 (E) Always Below 1 Ω
Result
RESULT PROCEED TO
OK A
NG (for Double Cab) B
NG (for Access Cab) C
B
REPLACE ROOF CONSOLE BOX ASSEMBLY
C
REPLACE ROOF CONSOLE BOX ASSEMBLY
8. CHECK HARNESS AND CONNECTOR (BRAKE ACTUATOR ASSEMBLY - VSC OFF SWITCH)
(a) Disconnect the S1 skid control ECU (brake actuator assembly) connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *