Last Modified: 11-13-2015 6.6 J Doc ID: RM000001DXP038X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster): VSC Buzzer
Circuit; 2016 MY Tacoma [08/2015 - ]
VSC Buzzer Circuit
The skid control ECU (brake actuator assembly) is connected to the combination meter via CAN communication.
The combination meter has a built-in VSC warning buzzer:
Sounds intermittently to inform the driver if the temperature of brake actuator assembly has increased
excessively due to continuous operation of AUTO LSD.
Sounds intermittently to inform the driver that the VSC is operating.
When replacing the skid control ECU (brake actuator assembly), perform the zero point calibration .
1. CHECK CAN COMMUNICATION LINE
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.