Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
S1-24 (TS) - D4-12 (TS) Always Below 1 Ω
S1-24 (TS) or D4-12 (TS) - Body ground Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
2. CHECK HARNESS AND CONNECTOR (CG of DLC3 - BODY GROUND)
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
D4-4 (CG) - Body ground Always Below 1 Ω
Text in Illustration
*a Front view of DLC3
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE BRAKE ACTUATOR ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *