Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

A
OK
(a) Check if CAN communication system DTCs are output .
Result
RESULT PROCEED TO
DTC is not output A
DTC is output B
B
CHECK CAN COMMUNICATION SYSTEM
2. INSPECT DLC3
(a) Turn the ignition switch to ON.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION SWITCH CONDITION SPECIFIED CONDITION
D4-13 (TC) - D4-4 (CG) Ignition switch ON 11 to 14 V
Text in Illustration
*a Front view of DLC3
NG
GO TO STEP 4
3. REPLACE ECM
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *