Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

A
Last Modified: 11-13-2015 6.6 J Doc ID: RM000005VAQ000X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster): Slip Indicator
Light does not Come ON; 2016 MY Tacoma [08/2015 - ]
Slip Indicator Light does not Come ON
DESCRIPTION
Refer to Slip Indicator Light Remains ON .
WIRING DIAGRAM
Refer to Slip Indicator Light Remains ON .
INSPECTION PROCEDURE
NOTICE:
When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store
system information .
PROCEDURE
1. CHECK CAN COMMUNICATION SYSTEM
(a) Check if CAN communication system DTCs are output .
Result
RESULT PROCEED TO
DTC is not output A
DTC is output B
B
CHECK CAN COMMUNICATION SYSTEM
2. PERFORM ACTIVE TEST USING TECHSTREAM (SLIP INDICAT
OR LIGHT)
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *