Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM000000SRY03QX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION; 2016 MY Tacoma [08/2015 - ]
INSTALLATION
1. INSTALL REAR SPEED SENSOR
(a) Install the rear speed sensor with the nut.
Torque:
8.0 N·m {82 kgf·cm, 71in·lbf}
NOTICE:
M
ake sure that the sensor tip is clean.
(b) Connect the speed sensor connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
3. CHECK VSC SENSOR SIGNAL (for Hydraulic Brake Booster)
4. CHECK VSC SENSOR SIGNAL (for Vacuum Brake Booster)
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *