Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

NEXT
NEXT
Last Modified: 11-13-2015 6.6 D Doc ID: RM000005V9M000X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster): HOW TO PROCEED
WITH TROUBLESHOOTING; 2016 MY Tacoma [08/2015 - ]
HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
The vehicle stability control system troubleshooting procedures are based on the premise that the CAN
communication system is functioning normally. Check the CAN communication system first before
troubleshooting the vehicle stability control system.
*: Use the Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
2. CUSTOMER PROBLEM ANALYSIS
(a) Interview the customer and confirm the trouble .
3. CHECK DTC AND FREEZE FRAME DATA*
(a) Check and record DTC and Freeze Frame Data.
for DTC Check/Clear:
for Freeze Frame Data:
(b) Clear the DTC and Freeze Frame Data .
(c) Reconfirm the DTC.
(1) Reconfirm the DTC based on the recorded DTC and Freeze Frame Data.
for DTC Check/Clear:
for Freeze Frame Data:
HINT:
If DTC U0100, U0124 or U0126 is output together with a CAN communication DTC, first check the
appropriate sensor for a momentary open circuit .
If there is no response from the skid control ECU (brake actuator assembly), inspect the +BS circuit of the
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *