TROUBLE AREA SEE PROCEDURE
TC and CG terminal circuit
ABS warning light circuit (Remains on)
ABS warning light circuit (Does not come on)
Slip indicator light circuit (Remains on)
Slip indicator light circuit (Does not come on)
(4) Count the number of blinks of the ABS warning and slip indicator lights.
When the system is operating correctly, each light will blink continuously in a pattern of 0.25 seconds on,
and then 0.25 seconds off.
When one DTC is output, each light will output the same code at 4 second intervals (for example, code 21
would be output as 2 blinks, a 1.5 second pause, and then 1 blink).
When 2 or more DTCs are output, each light will output a different code at 2.5 second intervals, and when
all codes have been output, there will be a 4 second pause and the sequence will repeat.
When multiple codes are stored, they are output in order starting with the lowest DTC number.
(5) Check the details of the DTCs.
WARNING LIGHT DISPLAY TECHSTREAM DISPLAY