Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 D Doc ID: RM000005V9T000X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster): DTC CHECK /
CLEAR; 2016 MY Tacoma [08/2015 - ]
DTC CHECK / CLEAR
1. DTC CHECK/CLEAR (When Using Techstream)
(a) Check the DTC.
(1) Turn the ignition switch off.
(2) Connect the Techstream to the DLC3.
(3) Turn the ignition switch to ON.
(4) Turn the Techstream on.
(5) Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Chassis /
ABS/VSC/TRAC / Trouble Codes.
(6) Check the details of the DTCs .
(b) Clear the DTC.
(1) Turn the ignition switch off.
(2) Connect the Techstream to the DLC3.
(3) Turn the ignition switch to ON.
(4) Turn the Techstream on.
(5) Operate the Techstream to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRAC /
Trouble Codes.
(6) Clear the DTCs by following the prompts on the Techstream.
HINT:
R
efer to the Techstream operator's manual for further details.
2. DTC CHECK/CLEAR (When Using SST Check Wire)
(a) Check the DTC.
(1) Using SST, connect terminals 13 (TC) and 4 (CG) of the
DLC3.
SST: 09843-18040
Text in Illustration
*a Front view of DLC3
(2) Turn the ignition switch to ON.
(3) Observe the blinking pattern of the ABS warning and slip indicator lights in order to identify the DTC.
HINT:
If no code appears, inspect the TC and CG terminal circuit, and ABS warning and slip indicator lights
circuits.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *