Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
Result
PROCEED TO
OK
NG
NG
CLEAN OR REPLACE FRONT SPEED SENSOR
6. INSPECT FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
(a) Remove the front axle hub inner bearing .
(b) Check the front skid control rotor.
OK:
No scratches, oil, or foreign matter on the rotors.
NOTICE:
Check the speed sensor signal after cleaning or replacement .
HINT:
T
he front skid control rotor is incorporated into the front axle hub inner bearing.
If the skid control rotor needs to be replaced, replace it together with the front axle hub inner bearing.
(c) Reinstall the front speed sensor and the front axle hub inner bearing.
for the front speed sensor:
for the front axle hub inner bearing:
OK
GO TO STEP 8
NG
CLEAN OR REPLACE FRONT AXLE HUB INNER
BEARING
7. INSPECT SKID CONTROL SENSOR WIRE
(a) Remove the skid control sensor wire.
(b) Measure the resistance according to the value(s) in the table below.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *