Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
2. INSPECT FRONT SPEED SENSOR TIP
(a) Remove the front speed sensor .
(b) Check the speed sensor tip.
OK:
No scratches, oil, or foreign matter on the sensor tip.
NOTICE:
I
f no damage to the speed sensor tip is found during this inspection, do not replace the speed sensor.
If there is iron powder sticking to the rotor, this will result in a malfunction, so confirm that the rotor is not
contaminated with foreign material before replacing the sensor.
Check the speed sensor signal after cleaning or replacement .
Result
PROCEED TO
OK
NG
NG
CLEAN OR REPLACE FRONT SPEED SENSOR
3. INSPECT FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
(a) Remove the front axle hub inner bearing .
(b) Check the front skid control rotor.
OK:
No scratches, oil, or foreign matter on the rotors.
NOTICE:
Check the speed sensor signal after cleaning or replacement .
HINT:
The front skid control rotor is incorporated into the front axle hub inner bearing.
If the skid control rotor needs to be replaced, replace it together with the front axle hub inner bearing.
(c) Reinstall the front speed sensor and the front axle hub inner bearing.
for the front speed sensor:
for the front axle hub inner bearing:
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *