2. CHECK TIRE SIZE
(a) Check the tire size and condition of all 4 wheels.
All 4 tires are the same size and in the same condition.
REPLACE TIRES SO THAT ALL 4 TIRES ARE SAME
SIZE AND IN THE SAME CONDITION
3. RECONFIRM DTC
(a) Clear the DTC .
(b) Turn the ignition switch off.
(c) Perform the following 3 times:
Turn the ignition switch to ON and start the engine, drive the vehicle at a speed of 30 km/h (19 mph) or more for
at least 30 seconds, and then stop the vehicle and turn the ignition switch off.
(d) Check if the same DTC is output .
RESULT PROCEED TO
DTC is output A
DTC is not output B
USE SIMULATION METHOD TO CHECK
REPLACE BRAKE ACTUATOR ASSEMBLY