Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

A
A
PROCEDURE
1. CHECK PART NUMBER (ECM)
(a) Check that the proper ECM is installed.
Result
RESULT PROCEED TO
Proper ECM is installed (for 4WD or w/ Rear Differential Lock) A
Proper ECM is installed (except 4WD or w/o Rear Differential Lock) B
Proper ECM are not installed C
B
GO TO STEP 3
C
CHECK OR REPLACE CHARGING SYSTEM OR BATTERY
2. CHECK PART NUMBER (4 WHEEL DRIVE CONTROL ECU)
(a) Check that a proper 4 wheel drive control ECU is installed.
Result
RESULT PROCEED TO
Proper 4 wheel drive control ECU is installed A
Proper 4 wheel drive control ECU are not installed B
B
REPLACE 4 WHEEL DRIVE CONTROL ECU
3. CHECK BRAKE ACTUATOR ASSEMBLY
(
a) Check if the brake actuator assembly had been replaced before the DTC was recorded.
Result
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *