Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

(c) Using a union nut wrench, install the 6 brake tubes to the brake
actuator.
Text in Illustration
*a Torque Wrench Fulcrum Length
(1) for 12 mm flare nuts :
Torque:
Specified tightening torque -
20 N·m {199 kgf·cm, 14ft·lbf}
HINT:
C
alculate the torque wrench reading when changing the fulcrum
length of the torque wrench
.
When using a union nut wrench (fulcrum length of 20 mm (0.787
in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)): 18
N*m (187 kgf*cm, 13 ft.*lbf)
(2) for 10 mm flare nuts :
Torque:
Specified tightening torque -
15 N·m {155 kgf·cm, 11ft·lbf}
HINT:
Calculate the torque wrench reading when changing the fulcrum
length of the torque wrench .
When using a union nut wrench (fulcrum length of 22 mm (0.866
in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)): 14
N*m (145 kgf*cm, 10 ft.*lbf)
(d) Connect the brake actuator connector.
(e) Lock the connector lock lever.
NOTICE:
Make sure that the lever is locked securely.
3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 2TR-FE)
4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for 2TR-FE)
5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 2TR-FE)
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
7. FILL RESERVOIR WITH BRAKE FLUID
8. BLEED MASTER CYLINDER
9. BLEED BRAKE LINE
10. BLEED BRAKE ACTUATOR
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *