Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
OK
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Select CAN Bus Check from the System Selection Menu screen and follow the prompts on the screen
to inspect the CAN bus .
OK:
CAN Bus Check indicates no malfunctions in CAN communication.
NG
GO TO CAN COMMUNICATION SYSTEM (HOW TO
PROCEED WITH TROUBLESHOOTING)
2. PERFORM ACTIVE TEST USING TECHSTREAM (Indicat. Auto LSD)
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(f) According to the display on the Techstream, perform the Active Test.
Combination Meter
TESTER
DISPLAY
TEST PART CONTROL
RANGE
DIAGNOSTIC NOTE
Indicat. Auto
LSD
AUTO LSD indicator
light
OFF/ON
Perform the test with the vehicle stopped and the
engine idling
(g) Check that the AUTO LSD indicator light on the combination meter assembly turns on or off in
accordance with the Techstream operation.
OK:
The AUTO LSD indicator light turns on or off in accordance with the Techstream operation.
NG
GO TO METER / GAUGE SYSTEM (HOW TO
PROCEED WITH TROUBLESHOOTING)
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *