Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
Last Modified: 11-13-2015 6.6 J Doc ID: RM0000045Z801GX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster): Multi-terrain
Select Indicator Light does not Come ON; 2016 MY Tacoma [08/2015 - ]
Multi-terrain Select Indicator Light does not Come ON
DESCRIPTION
When the transfer gear position is L4, the multi-terrain select indicator light illuminates and control begins.
Under any of the following conditions, the multi-terrain select system does not begin control and the multi-terrain
select indicator light does not illuminate.
The vehicle is in the VSC/TRAC OFF state.
Crawl Control is operating.
There is a malfunction in the VSC system.
WIRING DIAGRAM
Refer to Crawl Indicator Light Remains ON .
INSPECTION PROCEDURE
NOTICE:
When replacing the skid control ECU (master cylinder solenoid), perform calibration .
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1.
CHECK CAN COMMUNICATION SYSTEM
NG
GO TO CAN COMMUNICATION SYSTEM (HOW TO
PROCEED WITH TROUBLESHOOTING)
2.
CHECK DTC
B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *