Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
A
1.
CHECK CAN COMMUNICATION SYSTEM
NG
GO TO CAN COMMUNICATION SYSTEM (HOW TO
PROCEED WITH TROUBLESHOOTING)
2. CHECK DTC
(
a) Check for DTCs
.
Result
RESULT PROCEED TO
DTC is not output A
DTC is output B
B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS
3. INSPECT SKID CONTROL ECU (PKB TERMINAL)
(
a) Disconnect the S1 skid control ECU (master cylinder solenoid) connector.
(b) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER
CONNECTION
SWITCH CONDITION SPECIFIED
CONDITION
S1-28 (PKB) - Body
ground
Multi-terrain select switch
not pushed in
10 kΩ or higher
Multi-terrain select switch
pushed in
Below 1 Ω
Text in Illustration
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *