Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

(a) Disconnect the stop light switch connector from the stop light switch.
(b) Turn the stop light switch counterclockwise, and remove the stop light switch.
(c) Insert the stop light switch until the body comes into contact
with the cushion.
NOTICE:
When inserting the stop light switch, support the pedal from
behind so that the pedal is not pushed in.
Take care not to depress the pedal during the operation.
(d) Make a quarter turn clockwise to install the stop light switch.
NOTICE:
The turning torque for installing the stop light switch:
Torque:
1.5 N·m {15 kgf·cm, 13in·lbf} or less
(e) Check the protrusion of the rod.
Protrusion of the rod:
0.5 to 2.6 mm (0.020 to 0.102 in.)
(f) Connect the stop light switch connector to the stop light switch.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *