Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM00000171Z00AX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE: BRAKE MASTER CYLINDER: REMOVAL; 2016 MY Tacoma [08/2015 - ]
REMOVAL
NOTICE:
Release the vacuum from booster by depressing the brake pedal several times.
Then remove the brake master cylinder from brake booster.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2
. DRAIN BRAKE FLUID
NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.
3. REMOVE CLUTCH RESERVOIR TUBE (for Manual Transmission)
(a) Disconnect the clutch reservoir tube from the reservoir.
4. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Disconnect the brake fluid level warning switch connector.
(b) Using a union nut wrench, disconnect the 2 brake lines from the
brake master cylinder sub-assembly.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *