Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
OK
2.
READ VALUE USING TECHSTREAM (REAR SPEED SENSOR)
NG
GO TO STEP 4
3. RECONFIRM DTC
(a) Clear the DTCs .
(b) Turn the ignition switch off.
(c) Start the engine.
(d) Drive the vehicle at a speed of 40 km/h (25 mph) or more for at least 60 seconds.
(e) Check if the same DTC is output .
Result
RESULT PROCEED TO
DTCs C1407 and C1408 are not output A
DTCs C1407 and/or C1408 are output B
B
REPLACE MASTER CYLINDER SOLENOID
A
USE SIMULATION METHOD TO CHECK
4. INSPECT SKID CONTROL SENSOR WIRE
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *