Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

C
GO TO STEP 16
A
REPAIR OR REPLACE HARNESS OR CONNECTOR
15. INSPECT REAR COMBINATION LIGHT ASSEMBLY
(a) w/ Cargo Light
(1) Remove the rear combination light assembly connector.
(2) Apply battery voltage to the terminals and check that the
rear combination light illuminates.
OK
MEASUREMENT CONDITION SPECIFIED CONDITION
Positive battery - Terminal 4
Negative battery - Terminal 1
Rear combination light illuminates
Text in Illustration
*a
Component without harness connected
(to Rear Combination Light Assembly)
(3) Reinstall the rear combination light assembly.
(b) w/o Cargo Light
(1) Remove the rear combination light assembly connector.
(2) Apply battery voltage to the terminals and check that the
rear combination light illuminates.
OK
MEASUREMENT CONDITION SPECIFIED CONDITION
Positive battery - Terminal 1
Negative battery - Terminal 2
Rear combination light illuminates
Text in Illustration
*a
Component without harness connected
(to Rear Combination Light Assembly)
(3) Reinstall the rear combination light assembly.
NG
REPLACE REAR COMBINATION LIGHT ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *