Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Standard Resistance:
Rear Combination Light Assembly RH
TESTER CONNECTION CONDITION SPECIFIED CONDITION
R39-1 (STP) - STOP LP CTRL-3 Always Below 1 Ω
R39-1 (STP) - Body ground Always 10 kΩ or higher
R39-2 (E) - Body ground Always Below 1 Ω
Standard Resistance:
Rear Combination Light Assembly LH
TESTER CONNECTION CONDITION SPECIFIED CONDITION
R38-1 (STP) - STOP LP CTRL-3 Always Below 1 Ω
R38-1 (STP) - Body ground Always 10 kΩ or higher
R38-2 (E) - Body ground Always Below 1 Ω
Standard Resistance:
High Mounted Stop Light Assembly (w/o Cargo Light)
TESTER CONNECTION CONDITION SPECIFIED CONDITION
C15-1 (B) - STOP LP CTRL-3 Always Below 1 Ω
C15-1 (B) - Body ground Always 10 kΩ or higher
C15-2 (E) - Body ground Always Below 1 Ω
High Mounted Stop Light Assembly (w/ Cargo Light)
TESTER CONNECTION CONDITION SPECIFIED CONDITION
C15-4 (B) - STOP LP CTRL-3 Always Below 1 Ω
C15-4 (B) - Body ground Always 10 kΩ or higher
C15-1 (E)- Body ground Always Below 1 Ω
(e) Reinstall the STOP LP CTRL relay.
(f) Reconnect the rear combination light assembly connector.
(g) Reconnect the high mounted stop light assembly connector.
Result
RESULT PROCEED TO
NG A
OK (Rear Combination Light Assembly) B
OK (High Mounted Stop Light Assembly) C
B
GO TO STEP 15
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *