Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

(c) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED
CONDITION
Red wire terminal - Black wire
terminal
Always Below 2 Ω
Text in Illustration
*1 Pump motor wire harness
*a Red wire
*b Black wire
(d) Install the pump motor wire harness to the master cylinder solenoid with the 2 screws.
Torque:
2.9 N·m {30 kgf·cm, 26in·lbf}
NG
REPLACE BRAKE BOOSTER WITH ACCUMULATOR
PUMP ASSEMBLY
OK
REPLACE HYDRAULIC BRAKE BOOSTER ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *