Tacoma

Toyota Tacoma 2015-2018 AXLE Workshop Manual

(a) Remove the rear wheel.
(b) Remove the rear brake drum .
(c) Inspect the axle shaft backlash.
(1) Using a dial indicator, check the backlash near the center of the axle shaft.
Maximum:
0.05 mm (0.0020 in.)
If the backlash exceeds the maximum, replace the bearing.
(d) Inspect the axle shaft deviation.
(1) Using a dial indicator, check the distortion of the surface of
the axle shaft.
Maximum:
0.05 mm (0.0020 in.)
If the deviation exceeds the maximum, replace the bearing.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *