10. SEPARATE TIE ROD END SUB-ASSEMBLY
(a) Remove the cotter pin and nut.
(b) Using SST, separate the tie rod end from the steering knuckle.
11. REMOVE FRONT SUSPENSION LOWER ARM
(a) Remove the 2 bolts, and separate the front suspension lower
arm from the front axle.
12. SEPARATE FRONT SUSPENSION UPPER ARM
(a) Support the front suspension lower arm with a jack.
(b) Remove the clip and nut.
(c) Using SST, separate the steering knuckle from the front
suspension upper arm.
13. REMOVE FRONT AXLE HUB
(a) for 4WD:
(1) Using a plastic hammer, separate the front axle hub from the front drive shaft.
(b) Remove the front axle hub.