(b) Using a union nut wrench, disconnect the brake tube from the
disc brake cylinder.
Use a container to catch the brake fluid as it drains out.
(c) Remove the 2 bolts and disc brake caliper.
6. REMOVE FRONT DISC
7. REMOVE FRONT AXLE HUB GREASE CAP (for 4WD)
(a) Using a screwdriver and a hammer, remove the front axle hub
o not damage the axle hub.
8. REMOVE FRONT AXLE HUB NUT (for 4WD)
(a) Remove the cotter pin and lock cap.
(b) Remove the front axle hub nut.
9. SEPARATE FRONT STABILIZER LINK ASSEMBLY
(a) Remove the nut and separate the stabilizer link from the
f the ball joint turns together with the nut, use a hexagon (6
mm) wrench to hold the stud.