Tacoma

Toyota Tacoma 2015-2018 AXLE Workshop Manual

10. INSTALL FRONT SPEED SENSOR
(a) Install the speed sensor wire harness onto the steering knuckle
with the bolt.
Torque:
13 N·m {133 kgf·cm, 10ft·lbf}
(b) Engage the 2 clips.
(c) Install the speed sensor with the bolt.
Torque:
8.3 N·m {85 kgf·cm, 73in·lbf}
11. INSTALL FRONT WHEEL
Torque:
113 N·m {1152 kgf·cm, 83ft·lbf}
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
13. FILL RESERVOIR WITH BRAKE FLUID (for Hydraulic Brake Booster)
14. FILL RESERVOIR WITH BRAKE FLUID (for Vacuum Brake Booster)
15. BLEED MASTER CYLINDER (for Vacuum Brake Booster)
16. BLEED BRAKE LINE (for Hydraulic Brake Booster)
17. BLEED BRAKE LINE (for Vacuum Brake Booster)
18. INSPECT FLUID LEVEL IN RESERVOIR (for Hydraulic Brake Booster)
19. INSPECT FLUID LEVEL IN RESERVOIR (for Vacuum Brake Booster)
20. INSPECT FOR BRAKE FLUID LEAK
21. CHECK VSC SENSOR SIGNAL (for Hydraulic Brake Booster)
22. CHECK VSC SENSOR SIGNAL (for Vacuum Brake Booster)
23. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *