Tacoma

Toyota Tacoma 2015-2018 AXLE Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM0000016X404DX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: AXLE: FRONT AXLE HUB: INSTALLATION; 2016 MY Tacoma [08/2015 - ]
INSTALLATION
1. INSTALL FRONT AXLE HUB
2. INSTALL FRONT SUSPENSION UPPER ARM
(a) Install a new nut and clip.
Torque:
110 N·m {1122 kgf·cm, 81ft·lbf}
3. INSTALL FRONT SUSPENSION LOWER ARM
(a) Install the front suspension lower arm with the 2 bolts.
Torque:
160 N·m {1631 kgf·cm, 118ft·lbf}
4. INSTALL TIE ROD END SUB-ASSEMBLY
(a) Install the tie rod end with the nut.
Torque:
91 N·m {928 kgf·cm, 67ft·lbf}
(b) Install a new cotter pin.
NOTICE:
If the holes in the cotter pin are not aligned, tighten the nut an
additional 60°.
5. INSTALL FRONT STABILIZER LINK ASSEMBLY
(a) Install the stabilizer link onto the steering knuckle with the nut.
Torque:
70 N·m {714 kgf·cm, 52ft·lbf}
HINT:
I
f the ball joint turns together with the nut, use a hexagon (6
mm) wrench to hold the stud.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *