Tacoma

Toyota Tacoma 2015-2018 AXLE Workshop Manual

Last Modified: 11-13-2015 6.6 G Doc ID: RM0000016ZS00MX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: AXLE: AXLE SYSTEM: ON-VEHICLE INSPECTION; 2016 MY Tacoma [08/2015 - ]
ON-VEHICLE INSPECTION
1. INSPECT FRONT AXLE HUB BEARING
(a) Remove the front wheel.
(b) for 4WD:
(1) Remove the front axle hub grease cap .
(c) Remove the front disc brake caliper .
(d) Remove the front disc.
(e) Inspect the axle hub backlash.
(1) Using a dial indicator, check the backlash near the center of the axle hub.
Maximum:
0.05 mm (0.0020 in.)
If the backlash exceeds the maximum, replace the bearing.
(f) Inspect the axle hub deviation.
(1) Using a dial indicator, check the distortion of the surface of
the axle hub.
Maximum:
0.05 mm (0.0020 in.)
If the deviation exceeds the maximum, replace the bearing.
2. INSPECT REAR AXLE HUB BEARING
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *