Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

Last Modified: 11-13-2015 6.6 J Doc ID: RM000000TS60C8X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): IG Power
Source Circuit; 2016 MY Tacoma [08/2015 - ]
IG Power Source Circuit
DESCRIPTION
The main power source is supplied to the air conditioning amplifier assembly when the ignition switch is turned to
ON.
The power is used for operating the air conditioning amplifier assembly, servo motors, etc.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1.
CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - IG
POWER SOURCE)
(a) Disconnect the A36 air conditioning amplifier assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION SWITCH CONDITION SPECIFIED CONDITION
A36-1 (IG+) - Body ground Ignition switch off Below 1 V
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *