Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
1. PERFORM ACTIVE TEST USING TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Air Conditioner / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Air Conditioner
TESTER DISPLAY TEST PART CONTROL RANGE DIAGNOSTIC NOTE
Blower Motor Blower motor with fan sub-assembly Min.: 0, Max.: 31 -
OK:
Blower motor with fan sub-assembly operates and blower motor speed changes.
RESULT PROCEED TO
OK A
NG (Blower motor with fan sub-assembly does not operate) B
NG (Blower motor with fan sub-assembly operates but blower motor speed does not change) C
B
GO TO STEP 2
C
GO TO STEP 8
A
PROCEED TO NEXT SUSPECTED AREA SHOWN IN
PROBLEM SYMPTOMS TABLE
2. INSPECT BLOWER MOTOR WITH FAN SUB-ASSEMBLY
(a) Remove the blower motor with fan sub-assembly
(b) Inspect the blower motor with fan sub-assembly .
NG
REPLACE BLOWER MOTOR WITH FAN
SUB-ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *