Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

Last Modified: 11-13-2015 6.6 J Doc ID: RM000000TS70AMX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): Back-up
Power Source Circuit; 2016 MY Tacoma [08/2015 - ]
Back-up Power Source Circuit
DESCRIPTION
The back-up power source circuit for the air conditioning amplifier assembly is shown below. Power is supplied
even when the ignition switch is off. The power is used for diagnostic trouble code memory, etc.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1.
CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY -
BATTERY)
(a) Disconnect the A36 air conditioning amplifier assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
A36-17 (B) - Body ground Always 11 to 14 V
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *