Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
2.
INSPECT NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (FOR
DRIVER SIDE AIR MIX)
(a) Remove the No. 3 air conditioning radiator damper servo sub-assembly (for driver side air mix)
.
(b) Inspect the No. 3 air conditioning radiator damper servo sub-assembly (for driver side air mix)
.
NG
REPLACE NO. 3 AIR CONDITIONING RADIATOR
DAMPER SERVO SUB-ASSEMBLY (FOR DRIVER
SIDE AIR MIX)
3.
CHECK HARNESS AND CONNECTOR (NO. 3 AIR CONDITIONING RADIATOR DAMPER
SERVO SUB-ASSEMBLY - AIR CONDITIONING AMPLIFIER ASSEMBLY)
(a) Disconnect the D30 No. 3 air conditioning radiator damper servo sub-assembly (for driver side air
mix) connector.
(b) Disconnect the A35 air conditioning amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
D30-6 (MCD) - A35-12 (AMDC) Always Below 1 Ω
D30-7 (MHD) - A35-11 (AMDH) Always Below 1 Ω
D30-6 (MCD) or A35-12 (AMDC) - Body ground Always 10 kΩ or higher
D30-7 (MHD) or A35-11 (AMDH) - Body ground Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE AIR CONDITIONING AMPLIFIER
ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *