Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
(a) Remove the No. 1 air conditioning radiator damper servo sub-assembly (for mode switching) .
(b) Inspect the No. 1 air conditioning radiator damper servo sub-assembly (for mode switching) .
NG
REPLACE NO. 1 AIR CONDITIONING RADIATOR
DAMPER SERVO SUB-ASSEMBLY (FOR MODE
SWITCHING)
3.
C
HECK HARNESS AND CONNECTOR (NO. 1 AIR CONDITIONING RADIATOR DAMPER
SERVO SUB-ASSEMBLY - AIR CONDITIONING AMPLIFIER ASSEMBLY)
(a) Disconnect the D32 No. 1 air conditioning radiator damper servo sub-assembly (for mode switching)
connector.
(b) Disconnect the A35 air conditioning amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
D32-6 (FACE) - A35-27 (AOF) Always Below 1 Ω
D32-7 (DEF) - A35-28 (AOD) Always Below 1 Ω
D32-6 (FACE) or A35-27 (AOF) Always 10 kΩ or higher
D32-7 (DEF) or A35-28 (AOD) Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE AIR CONDITIONING AMPLIFIER
ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *