Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
2.
INSPECT NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (FOR
DRIVER SIDE AIR MIX)
(a) Remove the No. 3 air conditioning radiator damper servo sub-assembly (for driver side air mix)
.
(b) Inspect the No. 3 air conditioning radiator damper servo sub-assembly (for driver side air mix)
.
NG
REPLACE NO. 3 AIR CONDITIONING RADIATOR
DAMPER SERVO SUB-ASSEMBLY (FOR DRIVER
SIDE AIR MIX)
3.
CHECK HARNESS AND CONNECTOR (NO. 3 AIR CONDITIONING RADIATOR DAMPER
SERVO SUB-ASSEMBLY - AIR CONDITIONING AMPLIFIER ASSEMBLY)
(a) Disconnect the D30 No. 3 air conditioning radiator damper servo sub-assembly (for driver side air
mix) connector.
(b) Disconnect the A35 and A36 air conditioning amplifier assembly connectors.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
D30-1 (SG) - A35-17 (SG-4) Always Below 1 Ω
D30-2 (TPD) - A35-5 (TPL) Always Below 1 Ω
D30-3 (S5) - A36-14 (S5-3) Always Below 1 Ω
D30-1 (SG) or A35-17 (SG-4) - Body ground Always 10 kΩ or higher
D30-2 (TPD) or A35-5 (TPL) - Body ground Always 10 kΩ or higher
D30-3 (S5) or A36-14 (S5-3) - Body ground Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE AIR CONDITIONING AMPLIFIER
ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *