Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
(a) Remove the No. 1 air conditioning servo assembly (fresh/recirculation damper) .
(b) Inspect the No. 1 air conditioning servo assembly (fresh/recirculation damper) .
NG
REPLACE NO. 1 AIR CONDITIONING SERVO
ASSEMBLY (FRESH/RECIRCULATION DAMPER)
3.
C
HECK HARNESS AND CONNECTOR (NO. 1 AIR CONDITIONING SERVO ASSEMBLY -
AIR CONDITIONING AMPLIFIER ASSEMBLY)
(a) Disconnect the D29 No. 1 air conditioning servo assembly (fresh/recirculation damper) connector.
(b) Disconnect the A35 and A36 air conditioning amplifier assembly connectors.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
D29-1 (SG) - A36-13 (S5-2) Always Below 1 Ω
D29-2 (TPI) - A35-6 (TPI) Always Below 1 Ω
D29-3 (S5) - A35-16 (SG-3) Always Below 1 Ω
D29-1 (SG) or A36-13 (S5-2) - Body ground Always 10 kΩ or higher
D29-2 (TPI) or A35-6 (TPI) - Body ground Always 10 kΩ or higher
D29-3 (S5) or A35-16 (SG-3) - Body ground Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE AIR CONDITIONING AMPLIFIER
ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *