refrigerant leaks. The root cause of excessive refrigerant may be adding too much refrigerant when the
level was insufficient. Therefore, identify and repair the area where refrigerant leaks from as necessary.
11. INSPECT AIR CONDITIONER PRESSURE SENSOR
(a) Install a manifold gauge set.
(b) Reconnect the A34 air conditioner pressure sensor connector.
(c) Turn the ignition switch to ON.
(d) Measure the voltage according to the value(s) in the table
A35-2 (PRE) -
(less than 3140 kPa (32.0 kgf/cm
, 455 psi) and more than 176
Pa (1.8 kgf/cm
, 26 psi))
0.74 to 4.71 V
Text in Illustration
Component with harness connected
(Air Conditioning Amplifier Assembly)
REPLACE AIR CONDITIONING PRESSURE SENSOR
REPLACE AIR CONDITIONING AMPLIFIER
12. REPAIR A/C SYSTEM LEAK
(a) Identify the area where refrigerant leaks from.
(b) Repair the identified area of the A/C system.