Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
OK
2. INSPECT COOLER COMPRESSOR ASSEMBLY
(a) Remove the cooler compressor assembly .
(b) Inspect the cooler compressor assembly .
NG
REPLACE COOLER COMPRESSOR ASSEMBLY
3.
CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY -
COOLER COMPRESSOR ASSEMBLY)
(a) Disconnect the A1 cooler compressor assembly connector.
(b) Disconnect the A35 and A36 air conditioning amplifier assembly connectors.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
A35-7 (LOCK) - A1-2 (SSR+) Always Below 1 Ω
A36-28 (SG-8) - A1-3 (SSR-) Always Below 1 Ω
A35-7 (LOCK) or A1-2 (SSR+) - Body ground Always 10 kΩ or higher
A36-28 (SG-8) or A1-3 (SSR-) - Body ground Always 10 kΩ or higher
RESULT PROCEED TO
NG A
OK (When troubleshooting according to Problem Symptoms Table) B
OK (When troubleshooting according to the DTC) C
B
PROCEED TO NEXT SUSPECTED AREA SHOWN IN
PROBLEM SYMPTOMS TABLE
C
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *