(a) Remove the 2 bolts.
(b) Lift the cooler condenser assembly up, disengage the fitting of the condenser lower bracket to remove the
cooler condenser assembly from the rear side of the vehicle.
(c) Disengage the 2 claws to remove the 2 condenser upper
(d) Disengage the 2 claws to remove the 2 condenser lower brackets.
(e) Remove the cooler condenser assembly.
At the time of installation, please refer to the following instructions. If installing a new condenser, add
compressor oil to the condenser.
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
ND-OIL 12 or equivalent
Add 40 cc (1.4 fl.oz.)