Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

3.
CHECK HARNESS AND CONNECTOR (COOLER THERMISTOR (ROOM TEMPERATURE
SENSOR) - AIR CONDITIONING AMPLIFIER ASSEMBLY)
(a) Disconnect the R36 cooler thermistor (room temperature sensor) connector.
(b) Disconnect the A36 air conditioning amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
R36-1 - A36-16 (TR) Always Below 1 Ω
R36-2 - A36-26 (SG-1) Always Below 1 Ω
R36-1 or A36-16 (TR) - Body ground Always 10 kΩ or higher
R36-2 or A36-26 (SG-1) - Body ground Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE AIR CONDITIONING AMPLIFIER
ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *