Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

ND-OIL 12 or equivalent
(c) Install the O-ring to the suction hose sub-assembly.
(d) Install the suction hose sub-assembly to the cooler compressor assembly with the bolt.
Torque:
9.8 N·m {100 kgf·cm, 87in·lbf}
(e) Install the suction hose sub-assembly with the bolt.
Torque:
7.5 N·m {76 kgf·cm, 66in·lbf}
6. INSTALL SUCTION HOSE SUB-ASSEMBLY (for 2GR-FKS)
(a) Remove the vinyl tape from the suction hose sub-assembly.
(b) Apply sufficient compressor oil to a new O-ring and fitting surface of the cooler compressor assembly.
Compressor oil:
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
ND-OIL 12 or equivalent
(
c) Install the O-ring to the suction hose sub-assembly.
(d) Install the suction hose sub-assembly to the cooler compressor assembly with the bolt.
Torque:
9.8 N·m {100 kgf·cm, 87in·lbf}
(e) Install the suction hose sub-assembly with the bolt.
Torque:
7.5 N·m {76 kgf·cm, 66in·lbf}
7. INSTALL FRONT UPPER FENDER APRON SEAL
(a) Install the front upper fender apron seal with the 5 clips.
8. INSTALL GENERATOR ASSEMBLY (for 2GR-FKS)
9. INSPECT FAN AND GENERATOR V BELT (for 2TR-FE)
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
11. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
12. WARM UP ENGINE
13. INSPECT FOR REFRIGERANT LEAK
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *