Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

(b) Install the 2 nuts and 2 bolts in the order shown in the
illustration.
Torque:
21 N·m {214 kgf·cm, 16ft·lbf}
(c) Connect the connector.
3. INSTALL COOLER COMPRESSOR ASSEMBLY (for 2GR-FKS)
(a) Using an E8 ''TORX'' socket wrench, temporarily install the cooler compressor assembly with the 2 stud
bolts.
(b) Install the 2 nuts and 2 bolts in the order shown in the
illustration.
Torque:
21 N·m {214 kgf·cm, 16ft·lbf}
(c) Connect the connector.
4. INSTALL DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the vinyl tape from discharge hose sub-assembly and connecting portion of the cooler compressor
assembly.
(b) Apply sufficient compressor oil to a new O-ring and fitting surface of the cooler compressor assembly.
Compressor oil:
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
ND-OIL 12 or equivalent
(
c) Install the O-ring to the discharge hose sub-assembly.
(d) Install the discharge hose sub-assembly to the cooler compressor assembly with the bolt.
Torque:
9.8 N·m {100 kgf·cm, 87in·lbf}
5. INSTALL SUCTION HOSE SUB-ASSEMBLY (for 2TR-FE)
(a) Remove the vinyl tape from the suction hose sub-assembly.
(b) Apply sufficient compressor oil to a new O-ring and fitting surface of the cooler compressor assembly.
Compressor oil:
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *