Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

(a) Install the water hose sub-assembly B to the heater radiator
assembly.
Text in Illustration
*a View A
*b Up Side
*c LH Side
*d Marking (White)
HINT:
P
erform the installation with the hose clip and mark at the
correct angle.
21. INSTALL AIR CONDITIONING TUBE ASSEMBLY
(a) Apply compressor oil to 2 new O-rings and install them onto the hose.
Compressor oil:
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
ND-OIL 12 or equivalent
(b) Install the air conditioner tube assembly and piping clamp.
HINT:
Check that the claw of the piping clamp is correctly fitted.
(c) Engage the 2 clamps to install the air condition
er tube assembly.
(d) Install the bolt.
Torque:
7.5 N·m {76 kgf·cm, 66in·lbf}
22. INSTALL SUCTION HOSE SUB-ASSEMBLY
(a) Apply compressor oil to 2 new O-rings and install them onto the pipe.
Compressor oil:
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
ND-OIL 12 or equivalent
(b) Install the air conditioner tube assembly and piping clamp.
HINT:
Check that the claw of the piping clamp is correctly fitted.
(c) Install the bracket with the 2 bolts.
T
orque:
7.5 N·m {76 kgf·cm, 66in·lbf}
23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *